ISU
Home
ISU OIC
Home
ISURFtech
Home
Advanced
Search
Recovery of dysprosium-enriched iron alloy from magnet scrap alloy via selective separation of rare earth elements
Category(s):
For Information, Contact:
OIC Commercialization Team
515-294-4740
licensing@iastate.edu
Web Published:
12/7/2015
ISURF #
4150
Summary:
Ames Laboratory and Critical Materials Institute researchers have developed a two stage extraction process to selectively separate neodymium and dysprosium from spent NdFeB magnets.

Development Stage:
Description:
Many of the technologies important to reducing green-house gas emissions involve the use of permanent magnets, specifically NdFeB magnets.  Found in automotive motors, consumer electronics and in wind turbine generators, these high-energy permanent magnets play an important in our everyday lives.  Despite their widespread use and the incorporation of rare earth elements in the magnets, it is estimated that perhaps as little as one percent of rare earth metals are recycled from spent and waste magnets.

One of the factors that impact recycling is the harsh conditions that are typically involved in the recycling process.  ISURF #04150 and #04391 use pyrometallurgical techniques to selectively extract the rare earth elements from NdFeB magnets, leaving the iron and boron residue behind.  The first extraction step uses liquid magnesium to selectively remove neodymium from the magnet, while the second step utilizes liquid bismuth to remove the dysprosium.  The rare earth elements are readily recovered from the extractant using rotary evaporation.

Group:
Advantage:
• Process may be used in either one step (recovery of both light and heavy rare earth elements) or in two steps (recovery of light and heavy rare earth elements separately) process
• Easy recovery of target metals from extractant by rotary evaporation
• Near quantitative yield of rare earth elements

Application:
Rare earth element recycling from spent or scrap magnets

Patent Information:
*To see the full version of the patent(s), follow the link below, then click on "Images" button.
Country Serial No. Patent No. Issued Date
United States 14/545,994 9,725,788* 8/8/2017


Direct Link: